聯系我們
青州統一重工機械有限公司
手機:15953665789 18706518777
電話:0536-3533567
地址:青州市彌河鎮小張計村
全國客服熱線:15953665789
您當前的位置:首頁 > 文章中心
絞吸式抽沙船不應盲目跟風,抽沙船也叫做吸沙船,分為絞吸式抽沙船,射吸式抽沙船,鉆探式抽沙船,它是利用吸沙泵的吸力將水底下的污泥和砂石吸出來通過排沙管排放到指定位置,這就是抽沙船的工作方式。由于人工砂的需求量增大,導致抽沙船的需求量增長,從而抽沙船被廣大群眾熟悉,抽沙船的發展前途是大有作為的?,F(xiàn)如今抽沙船廠家也是越來越多,盲目跟風不可怕,要選擇適合自己的挖沙船,才能帶來效益,下面就帶領大家了解些常見的誤區:
1.進口配件,有的用戶覺得進口東西一定就是好的,認為配件在使用中可以經受磨損,歐洲發達國家的配件在國內不一定有想象中的那么好,特別是配件有時發脾氣,容易引起事故,而國產的配件是根據各型號而制作的,價格公道合理,更適合絞吸式抽沙船。
2.拆掉發動機節溫器,有的用戶認為發動機溫度高是因為節溫器的緣故,其實,是錯誤的,冷卻液只能進行大循環,不能調節冷卻強度,很難保證發動機在較適宜的溫度下工作,反而會使發動機經常處于低溫狀態下工作,造成發動機功率下降,磨損加快,油耗增加。
3.潤滑油,由于絞吸式抽沙船的型號不同,用的潤滑油也是不一樣的,要根據排量、壓縮比等進行使用性能級別的選擇,然后按照負荷,氣溫等粘度級別的選擇,不要盲目的跟風,要從這幾個方面選擇適合自己的絞吸式抽沙船使用的潤滑油。
Cutter suction dredger should not blindly follow the trend, it is also called suction sand pumping vessel, divided into the cutter suction dredger, jet suction dredger, drilling pump dredger, it is the use of sand suction pump suction to underwater sludge and sand suction through the sand discharge pipe to the specified location, it is pumping sand the way of working. As the demand for artificial sand increases, resulting in demand growth and pumping sand, sand pumping by the public familiar with the future development, sand pumping was great. Now pumping sand manufacturers is also more and more, blindly follow the trend is not terrible, to choose their own dredging vessels, in order to bring benefits, the lead you to understand some of the common mistakes:
1. imported parts, some users feel that imported something is good, that can withstand the wear parts in use, the parts in the domestic developed countries in Europe do not have imagined so good, especially the parts sometimes temper, easy to cause the accident, and is based on various types of domestic production, price reasonable, more suitable for cutter suction dredger.
2. remove the engine thermostat, some users believe that the engine temperature is high because of the thermostat's sake, in fact, is wrong, the cooling liquid can only proceed big circulation, can adjust the cooling intensity, it is difficult to ensure the engine working at a suitable temperature, but will make the engine often in low temperature, causing the engine power down, wear faster, increased fuel consumption.
3. lubricating oil, due to different types of cutter suction dredger, lubricating oil is not the same, according to the displacement and compression ratio of performance level selection, and then according to the load, temperature and viscosity level selection, do not blindly follow the trend, to choose suitable for lubricating oil of cutter suction sand pumping their use from the following aspects.